The Silent Hektik F4126 regulator is the new version of the proven Silent Hektik regulator series and can be used by the smart charge curve both for previous lead batteries and for modern LiFePO4 batteries. The LiFePo4 batteries have the advantage of delivering a very high starting current with small dimensions and low weight. However, the low battery impedance can be a disadvantage when charging, if the battery is far discharged after starting and over 20A current can flow. The LiFePO4 battery can heat up due to the high current and with poor heat dissipation it is possible that the battery will wear out quickly.
Therefore, in the F4126, the LiFePo4 battery is first pre-charged at 13.2V, which significantly reduces the initial charging current and overheating. After that, the battery is automatically gently charged up to 14.3V in about 17 minutes. After 90 minutes, it then switches to trickle charge. This is a perfect LiFePO4 battery charge management with charge current control that reduces overheating and overcharging well above 90%.
Mechanically and plug-compatible, the regulator is compatible with the Ducati-Energia 343 620 regulator used in Rotax 912 / 914 & Jabiru engines.
Features:
- smart microprocessor technology
- line regulation 13,2V to 14,3V
- measurement on battery - not from "C"
- software IUU management for LiFePo4 & Pb
- charging voltage regulation
- charging current control by simulation
- reduced charge after 90 minutes
- temperature compensated charge
- redundant MosFet OVP >14,6V
- over temperature alarm >75°C
- contactless shutdown above >85°C
- battery check at power-on
- redundant minus connector to batterie
- fit to original connector housing
- fit to original screw fixing
- Made in Germany
Please note:
All known alternator regulators must be sufficiently cooled, preferably by the airstream.
Therefore, mounting the F4123 controller in the following UL patterns when installed at the original mounting location may result in failure:
Comco Ikarus C42 - assembly in Amarturen board
DynAero MCR-01 - Installation under the seat
Pipistrel - installation in the cockpit
In these cases please change the installation location of the controller.
Product no.: 982102
Print product data sheet
Shipping time: 1-2 working days